Risk Reduction: Any Credit for Mechanical Integrity?

“People give us credit only for what we ourselves believe.”  — Karl Gutzkow Several years ago, in a paper and presentation to the Global Congress on Process Safety (GCPS), PSM experts from OSHA observed that while it is common to see a mechanical integrity (MI) program listed as a safeguard in a PHA, this is [...]

By |2021-12-09T16:27:42-06:00December 9th, 2021|PHA, Process Safety Management, Risk Assessment, Workplace Safety|Comments Off on Risk Reduction: Any Credit for Mechanical Integrity?

E-Stops: The “Get Fired Button”

“Panic is a natural response to danger, but it’s one that severely compounds the risk.”  — David Ignatius At 2:30 am, on Saturday, October 2, 2021, a split in the San Pedro Bay Pipeline began discharging oil into the Pacific Ocean off the coast of California. Low pressure alarms in the control room indicated that there [...]

By |2021-11-18T14:52:54-06:00November 18th, 2021|Procedures, Process Safety, Process Safety Management, Workplace Safety|Comments Off on E-Stops: The “Get Fired Button”

Speed Of Thought

The degree of slowness is directionally proportional to the intensity of memory. The degree of speed is directionally proportional to the intensity of forgetting.” ― Milan Kundera, Slowness Every industry uses speed as a measurement to quantify productivity.  That productivity, whether gallons or railcar loads, is a tangible result that translates into revenue for a company.  Speed [...]

By |2021-10-07T14:55:38-05:00October 7th, 2021|PHA, Process Safety, Workplace Safety|Comments Off on Speed Of Thought

Safety Training: Why Do We Hate It?

“I wish we had more safety training.”  — No one. Ever. Have you ever had a coworker respond, “You are so lucky,” when you told them that you had some mandatory safety training coming up? No? When it comes to safety training, isn’t the word “mandatory” redundant? Have you ever attended or even been offered [...]

By |2021-09-17T12:55:04-05:00September 16th, 2021|Training, Workplace Safety|Comments Off on Safety Training: Why Do We Hate It?

Process Safety and Mental Health

“Because most suicides do not happen at work, many employers do not consider depression or suicide an industry problem or occupational hazard.”  — Stu Kemppairnen When we were younger, my wife really enjoyed napping in the afternoon. I didn’t get it. There was so much to do, how could anyone take prime “getting things done” [...]

By |2021-08-12T17:12:24-05:00August 12th, 2021|Process Safety, Workplace Safety|Comments Off on Process Safety and Mental Health

Also?

“I’m not offended by all the dumb blonde jokes because I know I’m not dumb…and I also know that I’m not blonde.”  — Dolly Parton See someone in glasses? They’re smart, right? See someone, especially a woman, with blonde hair? They’re dumb, right? Blonde and wears glasses? Now there’s a conundrum. These are ridiculous assumptions, [...]

By |2021-07-15T13:40:46-05:00July 15th, 2021|Process Safety Management, Workplace Safety|Comments Off on Also?

Out of Harm’s Way: Using Drones to Fight Chemical Plant Fires

“Running toward danger is foolhardy. But so is closing your eyes to it. Many perils become less dangerous once you understand their potential hazards.”  — Brandon Mull On Thursday, April 29, at about 2:30 pm, neighbors reported several explosions at the Manor Chemical Company in Affton, Missouri, a suburb on the southwest side of St. [...]

By |2021-05-06T14:59:54-05:00May 6th, 2021|Chemicals, Current Events, Workplace Safety|Comments Off on Out of Harm’s Way: Using Drones to Fight Chemical Plant Fires

Toeing the Line on Equipment Spacing

“Perfection of planned layout is only achieved by institutions on the point of collapse.” -C. Northcote Parkinson   Must be an Easy Way Out Every time you enter a concert venue or a movie theater, there is instruction on finding the exits so you know where to go in case of emergency.  The same can [...]

By |2021-04-01T16:05:43-05:00April 1st, 2021|Workplace Safety|Comments Off on Toeing the Line on Equipment Spacing

Combustible Dust Tests: Now What?

“We have first raised a dust and then complain we cannot see.”  — George Berkeley You don’t need to be convinced that combustible dusts are hazardous. You’ve seen the photographs of demolished grain elevators, of the Imperial Sugar plant in Port Wentworth, Georgia looking like the Dresden firebombing in World War II. You’ve heard about [...]

By |2021-03-11T15:42:42-06:00March 11th, 2021|Combustible Dust, Process Safety, Process Safety Management, Risk Assessment, Workplace Safety|Comments Off on Combustible Dust Tests: Now What?

Thinking Outside the Chatterbox

“Incomprehensible jargon is the hallmark of a profession.”-Kingman Brewster Jargon.  A word that most of us have heard before.  Many enjoy using certain phrases that amount to it, but others not so much.  Every industry seems to have some jargon to explain ideas in a way to communicate with others efficiently.  When you are new [...]

By |2021-02-25T15:21:29-06:00February 25th, 2021|Process Safety, Workplace Safety|Comments Off on Thinking Outside the Chatterbox
Go to Top