About Mike Schmidt

With a career in the CPI that began in 1977 with Union Carbide, Mike was profoundly impacted by the 1984 tragedy in Bhopal and has been working on process safety ever since.

My Process Isn’t Covered by the PSM Standard

“Habits are safer than rules; you don’t have to watch them. And you don’t have to keep them, either. They keep you.”  —Frank Crane You’ve done it! You found a way to operate your process without ever going over the 10,000 lb threshold quantity for flammable liquids or gases. You’ve found substitutes for the toxic [...]

By |2025-01-17T11:41:39-06:00July 12th, 2018|Process Safety, Process Safety Management|Comments Off on My Process Isn’t Covered by the PSM Standard

Human Factors: The Power of Words

“Words do not express thoughts very well. They always become a little different immediately after they are expressed, a little distorted, a little foolish.”  —Hermann Hesse I was just treated to a full-body pat-down by the Transportation Safety Administration (TSA). For frequent flyers, tales of woe regarding the TSA are like, um, opinions. Everybody has [...]

By |2025-01-17T11:43:02-06:00July 5th, 2018|Current Events, Process Safety Management, Workplace Safety|Comments Off on Human Factors: The Power of Words

Safety Incidents: Blaming the Victim

“Our culture peculiarly honors the act of blaming, which it takes as the sign of virtue and intellect.” –Lionel Trilling Although the phrase, “blaming the victim,” has been around for almost 50 years, it has received renewed attention, especially regarding sexual assault and bullying. Widely condemned, victim blaming is the tendency to blame victims and [...]

By |2025-01-17T11:44:32-06:00June 21st, 2018|Process Safety, Workplace Safety|Comments Off on Safety Incidents: Blaming the Victim

If It Weren’t For Bad Luck, We’d Have No Luck at All

Only bad golfers are lucky. They’re the ones bouncing balls off trees, curbs, turtles and cars. Good golfers have bad luck. When you hit the ball straight, a funny bounce is bound to be unlucky.”  –Lee Trevino At the recent Global Congress on Process Safety, a slogan showed up several times. In presentations, on displays, [...]

By |2025-01-17T11:45:11-06:00June 14th, 2018|Process Safety|Comments Off on If It Weren’t For Bad Luck, We’d Have No Luck at All

How Rare is Rare?

“The unlikely combination of potatoes and pasta does appear in some Italian recipes.”  Yotam Ottolenghi People sometimes have a hard time appreciating the difference between risk and consequences. To help, we ask them to imagine the worst thing possible that could actually happen at their plant, but not to say what it is. Then we [...]

By |2025-01-17T11:45:44-06:00June 7th, 2018|Process Safety, Process Safety Management, Risk Assessment|Comments Off on How Rare is Rare?

Top 12 Issues for Facility Siting Studies: What Does OSHA Expect?

“I just let emotion dictate what the arrangement is.”  Jeff Buckley, singer-songwriter Emotion is a great way to approach the arrangement of music. As an approach to the arrangement of hazards in a facility that processes highly hazardous chemicals, however, it leaves a lot to be desired. So, OSHA’s Process Safety Management standard demands that [...]

By |2025-01-17T11:47:00-06:00May 31st, 2018|Process Safety, Process Safety Management, Workplace Safety|Comments Off on Top 12 Issues for Facility Siting Studies: What Does OSHA Expect?

10 Years

“An organization, no matter how well designed, is only as good as the people who live and work in it.”  -Dee Hock May 22 marks our tenth anniversary. We began with one purpose: to make the world a safer place. Started in 2008 at the request of its first customer, Bluefield Process Safety has grown [...]

By |2025-01-17T11:48:25-06:00May 17th, 2018|Current Events|Comments Off on 10 Years

Just to be Safe: Can You be Too Conservative?

“I’m a conservative, but I’m not a nut about it.”  George H.W.Bush We’ve all heard it.  “You need to be conservative, just to be on the safe side.”  It’s an article of faith in the safety community.  Like all articles of faith and other religious beliefs, any deviation is heresy with the potential for excommunication.  [...]

By |2025-01-17T11:49:16-06:00May 3rd, 2018|Process Safety, Process Safety Management, Risk Assessment, Workplace Safety|Comments Off on Just to be Safe: Can You be Too Conservative?

In the Line of Duty: Workers’ Memorial Day

"As we express our gratitude, we must never forget that the highest appreciation is not to utter words, but to live by them."  —John F. Kennedy In 2016, the most recent year for which the Bureau of Labor Statistics has released data, 5190 Americans died in the line of duty.  They were loggers and librarians, [...]

By |2025-01-17T11:50:01-06:00April 26th, 2018|Current Events, Workplace Safety|Comments Off on In the Line of Duty: Workers’ Memorial Day

What Does an OSHA Fine Mean?

“There is no worse place … to be than on Page 1, above the fold in your daily newspaper.”  Gen. Michael Hayden, former director of the National Security Agency When high profile disasters happen, incidents with a lot of media coverage, I’ve noticed that news organizations make a point of reporting how many OSHA citations [...]

By |2025-01-17T11:51:44-06:00April 5th, 2018|Process Safety, Process Safety Management, Workplace Safety|Comments Off on What Does an OSHA Fine Mean?
Go to Top