About Mike Schmidt

With a career in the CPI that began in 1977 with Union Carbide, Mike was profoundly impacted by the 1984 tragedy in Bhopal and has been working on process safety ever since.

Process Safety and Mental Health

“Because most suicides do not happen at work, many employers do not consider depression or suicide an industry problem or occupational hazard.”  — Stu Kemppairnen When we were younger, my wife really enjoyed napping in the afternoon. I didn’t get it. There was so much to do, how could anyone take prime “getting things done” [...]

By |2021-08-12T17:12:24-05:00August 12th, 2021|Process Safety, Workplace Safety|Comments Off on Process Safety and Mental Health

Death in La Porte: Glacial Acetic Acid is Not Vinegar

“I attach a Material Safety Data Sheet for the safe handling of table salt as required by a governmental agency. One could wax sarcastically about this travesty suggesting that next we will be faced with recommendations for handling sugar or even water. Certainly, something is out of control!”  — Harley W. Rhodehamel, in constituent letter [...]

By |2021-07-30T00:17:31-05:00July 29th, 2021|Chemicals, Current Events, Process Safety|Comments Off on Death in La Porte: Glacial Acetic Acid is Not Vinegar

Steam or Hot Oil: Which Is Safer?

“I have always fancied that the end of the world will be when some enormous boiler, heated to three thousand millions of atmospheric pressure, shall explode and blow up the globe… They [the Americans] are great boiler makers.”  — Jules Verne I was recently asked about using hot oil instead of steam to heat process [...]

By |2021-07-22T15:20:05-05:00July 22nd, 2021|Chemicals, Process Safety, Process Safety Management|Comments Off on Steam or Hot Oil: Which Is Safer?

Also?

“I’m not offended by all the dumb blonde jokes because I know I’m not dumb…and I also know that I’m not blonde.”  — Dolly Parton See someone in glasses? They’re smart, right? See someone, especially a woman, with blonde hair? They’re dumb, right? Blonde and wears glasses? Now there’s a conundrum. These are ridiculous assumptions, [...]

By |2021-07-15T13:40:46-05:00July 15th, 2021|Process Safety Management, Workplace Safety|Comments Off on Also?

SIS and the Bathtub Curve

“When I was young, I would sit in the bath and ideas would come to me. But I’m not young anymore, so now I just sit in the bath.”  — Aki Kaurismaki “We’re installing a safety instrumented system in our existing process. Do we have to pull out all the existing instruments and replace them [...]

By |2021-07-01T14:57:47-05:00July 1st, 2021|Process Safety, Process Safety Management|Comments Off on SIS and the Bathtub Curve

How Much Credit for Alarms?

“Morning comes whether you set the alarm or not.”  — Ursula K. Le Guin Late one evening a few months after we moved into our offices on Cherokee Street, the alarm went off. My home is nearby, and I got there within a couple of minutes to discover that one of the doors had been [...]

By |2021-06-24T14:49:47-05:00June 24th, 2021|PHA, Procedures, Process Safety, Process Safety Management|Comments Off on How Much Credit for Alarms?

Storage Tanks: Labeling Requirements

“Don’t rely too much on labels, for too often they are fables.”  — Charles Spurgeon Trick question: “What does PSM require for storage tank labeling?” Trick answer: “Nothing.” Helpful answer: “OSHA doesn’t require storage tank labeling under the Process Safety Management (PSM) standard, 29 CFR 1910.119. It does, however, have requirements for storage tank labeling [...]

Slightly Flammable? Low GWP Refrigerants and PSM

“You can’t get a little bit pregnant, son.”  — Hal Holbrook as Lou Mannheim in Wall Street, (1987) A whole new group of processes are about to become PSM-covered. Maybe. Some HVAC contractors have begun warning their customers that the new low-GWP refrigerants that they must switch to are “slightly flammable”, so may come under [...]

By |2021-05-13T14:04:07-05:00May 13th, 2021|Current Events, Gas, Process Safety, Process Safety Management|Comments Off on Slightly Flammable? Low GWP Refrigerants and PSM

Out of Harm’s Way: Using Drones to Fight Chemical Plant Fires

“Running toward danger is foolhardy. But so is closing your eyes to it. Many perils become less dangerous once you understand their potential hazards.”  — Brandon Mull On Thursday, April 29, at about 2:30 pm, neighbors reported several explosions at the Manor Chemical Company in Affton, Missouri, a suburb on the southwest side of St. [...]

By |2021-05-06T14:59:54-05:00May 6th, 2021|Chemicals, Current Events, Workplace Safety|Comments Off on Out of Harm’s Way: Using Drones to Fight Chemical Plant Fires

DHAs: An OSHA Requirement?

“Speed limit 55. It’s not just a good idea. It’s the law.”  — Advertising Council and U.S. Department of Transportation (1977) Ever since the National Fire Protection Association (NFPA) published the 2019 Edition of NFPA 652, Standard on the Fundamentals of Combustible Dust, which states in §7.1.1.2 that a Dust Hazard Analysis (DHA) must be [...]

By |2021-04-29T16:43:06-05:00April 29th, 2021|Combustible Dust, Process Safety, Process Safety Management|Comments Off on DHAs: An OSHA Requirement?
Go to Top